How to Apply for BIS FMCS Certification from Indonesia

Indonesian manufacturers are exporting more electronics, machinery, chemicals, and consumer goods to India. Many of these products fall under India’s mandatory quality rules, so a factory in Jakarta, Surabaya, or Batam cannot ship them freely without the right certification. This guide explains BIS FMCS Certification from Indonesia: what it is, who needs it, and how to apply.

What Is BIS FMCS Certification?

FMCS stands for Foreign Manufacturers Certification Scheme, run by the Bureau of Indian Standards (BIS). It lets foreign manufacturers use the ISI Mark on products that meet Indian safety and quality requirements. It operates under the BIS Act, 2016 and the BIS (Conformity Assessment) Regulations, 2018. 


In simple terms, an Indonesian factory that makes a product covered by a compulsory Indian Standard must hold a BIS licence before its goods can be sold or imported into India.

Who Needs It?

You likely need FMCS if:

  • Your product is covered by an Indian Quality Control Order (QCO) or a compulsory Indian Standard.

  • Your factory is physically located in Indonesia, with no manufacturing unit in India.

  • You want to place the ISI Mark on your product.

Not every product uses FMCS. Electronics and IT products often fall under the Compulsory Registration Scheme (CRS), which relies on lab testing and self-declaration, and does not require a factory audit. Confirm which scheme covers your product before you spend money on testing. 

Documents to Prepare

Gather these before you start:

  • Business registration documents for your Indonesian company

  • Factory address, layout, and manufacturing process details

  • Product specifications and the relevant Indian Standard (IS) number

  • Details of your quality control system and in-house testing facilities

  • An ISO 9001 quality management certificate, which is highly recommended as supporting evidence.

  • Details of your Authorised Indian Representative (AIR), who acts as BIS’s local contact

  • Brand and trademark details, and authorisation letters where applicable

Step-by-Step Process to Apply

Step 1: Identify the Applicable Indian Standard

Find the exact IS number for your product. Check whether it is under mandatory certification and which BIS scheme covers it. A wrong standard causes delays later.

Step 2: Appoint an Authorised Indian Representative

BIS expects foreign applicants to nominate a representative in India for communication and compliance follow-ups. Choose someone reliable who understands BIS procedures.

Step 3: Submit the Application Online

This step has changed recently. Offline FMCS applications were accepted only until 31 May 2026. From 1 June 2026, applications go through the Manak Online platform. Create your account, fill in the manufacturer and product details, upload documents, and pay the application fee. 

Step 4: Product Testing

Samples are tested against the relevant Indian Standard in a BIS-recognised laboratory. Keep your own test records ready, because they show that you have a working quality system.

Step 5: Factory Inspection

BIS evaluates your Indonesian factory to check that you can consistently make products that conform to the standard. Inspectors typically review your production process, quality control, testing equipment, and record keeping. Foreign applicants pay the same fees as domestic manufacturers, plus per-diem charges for inspection. 

Step 6: Licence Grant

If testing and the inspection are satisfactory, BIS grants the licence, and you can use the ISI Mark on your products. After that, expect ongoing surveillance, including periodic testing and audits.

Read also How to Download BIS Certification: A Simple Step-by-Step Guide .

Cost and Timeline

Costs vary by product, number of models, and the testing required. One 2026 industry guide puts the total in a wide range of ₹25,000 to ₹2,50,000 or more, covering the application fee, marking fee, and lab testing. The same source lists a ₹1,000 non-refundable application fee and inspection charges starting at ₹7,000 per man-day. Fee concessions exist for micro enterprises, small businesses, and startups. Treat these figures as indicative and confirm current fees on the official BIS website. 

Budget for international travel costs for inspectors, since inspections happen at your factory in Indonesia. Most applicants should plan for several months from application to licence, depending on how complete the documents are and how quickly testing and inspection are scheduled.

Common Mistakes to Avoid

  1. Choosing the wrong scheme: Applying under FMCS when your product needs CRS, or the reverse.

  2. Incomplete documents: Missing or inconsistent paperwork is the most common cause of delay.

  3. Weak in-house testing: BIS expects functioning test facilities suited to your product.

  4. Ignoring the AIR role: Unresponsive representatives slow communication with BIS.

  5. Skipping a pre-audit: A mock inspection catches gaps before BIS does.

Tips for Faster Approval

  • Verify product standards and current QCO status before starting.

  • Prepare factory records, calibration certificates, and test reports in advance.

  • Make sure product names, model numbers, and addresses match across all documents.

  • Respond to BIS queries quickly.

  • Consider a qualified BIS consultant if you are new to the process.

Why It Matters for Indonesian Exporters

Holding the licence protects you from shipment rejection, customs holds, and penalties. It also builds buyer trust, since the ISI Mark certification is widely recognised by Indian importers and consumers.

Frequently Asked Questions

1. What is BIS FMCS Certification from Indonesia?
It is the licence that lets an Indonesian manufacturer use the ISI Mark on products covered by Indian mandatory standards, issued by the Bureau of Indian Standards.

2. Can I apply for BIS FMCS Certification from Indonesia online?
Yes. Since 1 June 2026, applications are submitted online through the Manak Online portal.

3. Do I need an Indian representative?
Yes. Foreign applicants nominate an Authorised Indian Representative to handle communication with BIS.

4. Is a factory inspection mandatory?
For ISI Mark (Scheme I) licences, yes. BIS inspects your factory to confirm that it can produce compliant goods consistently.

5. How much does it cost?
There is no single fee. Costs depend on the product, testing, and inspection days. Small enterprises may qualify for concessions. Check current fees with BIS.

6. What is the difference between FMCS and CRS?
FMCS gives foreign manufacturers an ISI Mark licence with factory inspection. CRS mainly covers electronics and IT goods through lab testing and self-declaration, without a factory audit.

7. How long is the licence valid?
Validity and renewal terms are set by BIS when it grants the licence. Check the licence conditions and plan the renewal early.

8. Can an Indonesian trader apply instead of the manufacturer?
No. The licence is issued to the manufacturer whose factory makes the product.

Conclusion

Getting BIS FMCS Certification from Indonesia takes planning, but the path is clear: identify the right standard, appoint an Indian representative, apply on Manak Online, complete testing and the factory inspection, then receive your licence. Start with accurate documents and a realistic timeline, and always verify current rules on the official BIS website, since scheme requirements and fees are updated from time to time.


Note: This article is for general information, not legal advice. Please confirm requirements with BIS or a qualified consultant like umspcs.in before applying.


source: https://getisimarkindia.mystrikingly.com/blog/how-to-apply-for-bis-fmcs-certification-from-indonesia


Comments

Popular posts from this blog

BIS Notification 2026: Big Relief in Marking Fees for MSMEs & Startups Announced

Best BIS Registration Consultants in India

Which Certificate is Required for Cosmetic Products in India?